Accessories

207-0044
3.25  (4.03  inc tax)  
  • 5VUSB,
5V power injector for USB (RB/411UAHR and RB/493G). IMPORTANT! 5VUSB is just injector cable, 5V power supplies must be sourced locally- we do not sell those. Accepts DC Plug, 1.1MM x 3.5MM.

002979
150.00  (186.00  inc tax)  
  • 12POW150,
CCR1072-1G-8S+ is equipped with two redundant Hot Swap 12v 150W AC/DC power supplies - if one of them goes out of order, second one will take over. Hot Swap 12v 150W AC/DC power supplies for CCR1072-1G-8S+ are now available for purchase separately. You can replace them on the go to ensure...

000142
11.29  (14.00  inc tax)  
  • AC/SWI,
2.4-5.8GHz Swivel Antenna with cable and U.fl connector. Approximately 4dBi gain

001440
24.19  (30.00  inc tax)  
  • RBPOE-CON-HP,
This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices. Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide...

003346
8.06  (9.99  inc tax)  
  • DRP-LTM,
DINrail PRO is a mounting bracket for LtAP mini series products, designed to fit standard 35 mm × 7.5 mm DIN rails. This bracket will allow to install LtAP mini next to the industrial control equipment like water meters etc., as well as in equipment racks. Mounting bracket is made from metal and...

001064
8.40  (10.42  inc tax)  
  • RBGPOE,
The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower. For using with any...

003469
11.00  (13.64  inc tax)  
  • GPEN11,
The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. The GPEN11 is part of the GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy ethernet alternative....

003437
15.32  (19.00  inc tax)  
  • GPeR,
The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m. Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be...

003347
6.45  (8.00  inc tax)  
  • K-65,
Rackmount ears set for RB4011 series

003343
12.10  (15.00  inc tax)  
  • LHGmount,
The LHG mount is a basic pole mount adapter for LHG series products. • Simple and low cost. • Supports all LHG series, products, including LHG XL. • Made from metal. • Package also includes a U-bolt and a K-58 mounting kit.

003002
24.19  (30.00  inc tax)  
  • mUPS,
The mUPS is a PoE injector with battery backup capability with a 12 V battery connector. It works just like a Gigabit PoE injector, but when power is lost, it switches over to the 12 V battery. Even if your power source is 28 V, the connected RouterBOARD will not reboot when the power source is...

000718
5.46  (6.77  inc tax)  
  • EZ-POEPA03,
Features: Cat5 RJ45 Input connector Cat5 RJ45 Output connector Power / Data Mixer Ethernet switches exapnd to Wireless AP   Product Links: Dimensions    Schematics   ...

002980
150.00  (186.00  inc tax)  
  • PW48V-12V150W,
We are now offering a Hot Swap -48V DC telecom power supply (product code PW48V-12V150W), available to purchase separately for use with CCR1072. Simply remove one of the current power supplies and replace with the new PW48V-12V150W for -48V installations - simple and easy. You don't event need...

002901
8.80  (10.91  inc tax)  
  • QME,
The quickMOUNT extra is a advanced wall mount adapter for large point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT extra gives possibility to turn...

002510
8.80  (10.91  inc tax)  
  • QMP-LHG,
The quickMOUNT pro LHG is a advanced wall or pole mount adapter for our new LHG antennas. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using...

003470
11.29   
  • RBGESP,
RBGESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lighting or surge damages. Comes with the outdoor case and special grounding cable.

001689
36.80  (45.63  inc tax)  
  • RBFTC11,
The FTC is a simple Fiber to Copper converter. Unlike many other media converters available on market, it has outdoor waterproof case with lock screw, it's mounting bracket can be attached and locked with a screw from inside the case. Unit has 12-57V PoE with 802.3af/at support. Comes with...

002328
7.25  (8.99  inc tax)  
  • ACOMNIRPSMA,
Now we offer 2.4Ghz 5dBi Dipole antennas with RPSMA connectors! Take BaseBox2 and simply attach two of those antennas on connectors of BaseBox2 to have 2x2 MIMO 2.4Ghz AP! By this you can have "2.4Ghz OmniTik", ideal for Outdoor Campus areas, for example, campings or trailer parks. Antennas...

001538
11.29  (14.00  inc tax)  
  • RBWMK,
The RB2011 wall mount kit (product code RBWMK) secures your RB2011 installation by protecting the cables from unplugging, ideal for public installations such as shared server rooms, attics, accessible closets and cabinets. Fits all standard RB2011 indoor cases (models RB2011L-IN,...

001639
9.68  (12.00  inc tax)  
  • ACRPSMA,
A super low loss 50cm long RPSMA cable for superior connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values.   The name of this cable comes from combining the words “flexible” and “waveguide”, to denote...

002899
5.46  (6.77  inc tax)  
  • QM,
The quickMOUNT is a basic wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT gives possibility to turn antenna within...

002378
8.80  (10.91  inc tax)  
  • QMP,
The quickMOUNT pro is a advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT pro gives possibility to turn...

003342
48.39  (60.00  inc tax)  
  • S+AO0005,
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible...

003125
6.55  (8.12  inc tax)  
  • SMASMA,
1m SMA male to SMA male cable, that can be used to connect your LTE card (with ACSMAUFL pigtail) to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these cables)
1 2