TELEPHONE ORDERS 2104511087
Monday - Friday: 9:00 - 17:00
FREE SHIPPING for orders over 0.00 €

MikroTik RBwAPG-60ad-SA, wAP 60Gx3 AP, 60GHz, Base Station, 180° antenna, Quad-Core 716MHz, 256MB, 1xGigabit, L4

003465
Volumetric weight: 1kg
730 days
Weight: 1.00 kg per item
179.84 
With VAT 223.00 
+

The wAP 60Gx3 AP is a new access point model for the 60 GHz spectrum. Compared with the regular wAP 60G AP, this new model has a completely new antenna array, with support for a much wider angle of coverage and is optimized specifically for multipoint operation.

The 96 antenna elements work with beamforming technology to provide connectivity for up to eight 60 GHz client devices at the same time, in a 180 degree field of view. Build a cost effective point to multipoint setup in the clean 60 GHz wireless spectrum, at a fraction of the cost.

Two wAP 60Gx3 AP units can be used in point-to-point configurations as well.

Specifications

Details
Product code RBwAPG-60ad-SA
Architecture ARM 32bit
CPU IPQ-4019
CPU core count 4
CPU nominal frequency 716 MHz
Dimensions 185 x 85 x 30 mm
License level 4
Operating System RouterOS
Size of RAM 256 MB
Storage size 16 MB
Storage type FLASH
Tested ambient temperature -40°C to 70°C

Powering

Details
PoE in 802.3af/at
PoE in input Voltage 20-57 V
Number of DC inputs 2 (DC jack, PoE-IN)
DC jack input Voltage 12-57 V
Max power consumption 11 W

Ethernet

Details
10/100/1000 Ethernet ports 1

Ethernet test results

RBwAPG-60ad-SAr2 IPQ-4019 1G one port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 81,2 986.1 234,9 962.2 1482,6 759.1
Bridging 25 bridge filter rules 81,2 986.1 227,7 932.7 231,9 118.7
Routing none (fast path) 81,2 986.1 235,1 963.0 1421,8 728.0
Routing 25 simple queues 81,2 986.1 235,1 963.0 458,3 234.6
Routing 25 ip filter rules 81,2 986.1 234,9 962.2 236,8 121.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

IPsec test results

RBwAPG-60ad-SAr2 IPQ-4018 IPsec throughput
Mode Configuration 1400 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Single tunnel AES-128-CBC + SHA1 37.9 424.5 59 241.7 61.6 31.5
256 tunnels AES-128-CBC + SHA1 36 403.2 38.5 157.7 39.8 20.4
256 tunnels AES-128-CBC + SHA256 36 403.2 38.5 157.7 39.8 20.4
256 tunnels AES-256-CBC + SHA1 34.4 385.3 37.9 155.2 39.8 20.4
256 tunnels AES-256-CBC + SHA256 34.4 385.3 37.9 155.2 39.8 20.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Part Number:
RBwAPG-60ad-SA
Supplier:
MikroTik