Τηλεφωνικές παραγγελίες 2104511087
Δευτέρα - Παρασκευή: 9:00 - 17:00
_tmpl_free_shipping_above_amount_max_kilos

Ubiquiti UniFi UAP-nanoHD, 2.8dBi, 23dBm, 300Mbps, 2x2 @ 2.4GHz & 3dBi, 26dBm, 1733Mbps, 4x4 @ 5GHz, 1xGigabit

Κάνε μια ερώτηση
730 ημέρες
Βάρος: 1.00 kg ανά τεμάχιο
165.32 

Με ΦΠΑ 205.00 
+
Ογκομετρικό βάρος: 1kg
Διαθέσιμο για παραγγελία
Παράδοση 1 με 3 εργάσιμες

802.11AC Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP to communicate with multiple clients at the same time - significantly increasing multi-user throughput and overall user experience. 

MU-MIMO Assuming the same conditions, a Wave 2 AP provides up to 75% improvement* overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level. 

4x4 Spatial Streams At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:

  • four 1x1 clients
  • two 2x2 clients
  • one 2x2 client and two 1x1 clients
  • one 3x3 client and one 1x1 client

A 4x4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3x3 in both radio bands. 

The UniFi nanoHD AP is the UniFi 802.11ac Wave 2 AP with the smallest form factor. Combining the performance increases from MU-MIMO technology and the use of 4x4 spatial streams, the UniFi nanoHD AP delivers up to 125% greater performance than a typical Wave 1 AP. 

Low-Profile Mounting: The UniFi nanoHD AP's low-profile ceiling mount (sold separately) allows you to seamlessly integrate the AP into its environment. 

Designed for Seamless Integration: Optional skins (sold separately) allow the UniFi nanoHD AP to discreetly blend into its setting. Choose from the following designs:

UBNT-UniFi-nanoHD


 

 

 

 

Technical specification

Dimensions 160 x 160 x 32.65 mm (6.30 x 6.30 x 1.29")
Weight 300 g (10.6 oz)
Weight With Mounting Kits 830 g (1.83 lb)
Networking Interface (1) 10/100/1000 Ethernet Port
Buttons Reset
Power Method 802.3af PoE
Power Supply UniFi Switch (PoE)
Power Save Supported
Beamforming Supported
Maximum Power Consumption 10.5W
Supported Voltage Range 44 to 57VDC
TX Power 2.4 GHz: 23 dBm 5 GHz: 26 dBm
MIMO 2.4 GHz: 2x2 5 GHz: 4x4
Radio rates 2.4 GHz: 300 Mbps 5 GHz: 1733 Mbps
Antennas 2.4 GHz: (2) Single-Port, Single-Polarity Antennas, 2.8 dBi each 5 GHz: (2) Single-Port, Dual-Polarity Antennas, 3 dBi each
Wi-Fi Standards 802.11 a/b/g/n/ac/ac-wave2
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) 802.11w/PMF
BSSID 8 per Radio
Mounting Wall/Ceiling (Kits Included)
Operating Temperature -10 to 70° C (14 to 158° F)
Operating Humidity 5 to 95% Noncondensing
Certifications CE, FCC, IC
Advanced Traffic Management
VLAN 802.1Q
Advanced QoS Per-User Rate Limiting
Guest Traffic Isolation Supported
WMM Voice, Video, Best Effort, and Background
Concurrent Clients 200+
Supported Data Rates (Mbps)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40)
802.11ac 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80)
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps

 


Σχετικά Αρχεία:

Part Number:
UAP-nanoHD
Availability:
available for order
Προμηθευτές:
Woox

Δεν βρέθηκαν δημοσιεύσεις

Γράψτε μια κριτική
Χρησιμοποιούμε Cookies!
Για να προσφέρουμε καλύτερη εμπειρία χρήσης του eshop μας. Πολιτική Cookies
Αποδοχή
Ρυθμίσεις Cookies