Phone Orders 2104511087
Monday - Friday: 9:00 - 17:00
FREE SHIPPING for orders over 0.00 €

MikroTik Routerboard RBmAP2nD, 1.3dBi, 17dBm, 650MHz, 64MB, 2.4GHz, 2xEthernet, PoE out, USB, L4

730 days
Weight: 1.00 kg per item
With VAT 45.50 
Volumetric weight: 1kg

The mAP (micro Access Point) is a tiny size wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources - USB, Passive PoE and power jack. It also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.

Included Parts: 24V 0.8A power adapter , USB OTG cable

Product specifications

Product code RBmAP2nD
CPU nominal frequency 650 MHz
CPU core count 1
Size of RAM 64 MB
10/100 Ethernet ports 2
Wireless standards 802.11b/g/n
Wireless chip model QCA9531
Number of USB ports 1
Power Jack 1
802.3af support no
PoE out Yes
PoE in 802.3af/at
Supported input voltage 11 V - 57 V
Voltage Monitor Yes
PCB temperature monitor Yes
Dimensions 68x68x19mm
Operating System RouterOS
Tested ambient temperature -10C to +70C tested
License level 4
Antenna gain DBI 1.2
Max Power consumption 5W
USB slot type microUSB type AB
USB Power Reset Yes
Number of chains 2
Storage type FLASH
Storage size 16 MB

Wireless specifications

2.4 GHz
 Transmit power (dBm)Receive SensitivityTransmit power (mW)
1MBit/s 22 -96 158
11MBit/s 22 -89 158
6MBit/s 20 -93 100
54MBit/s 18 -74 63
MCS0 20 -93 100
MCS7 16 -71 40

wireless parameters may be limited in software, depending on your local regulatory limitations


RBmAP2nD QCA9531 100M two port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 16.3 197.9 47.1 192.9 173.6 88.9
Bridging 25 bridge filter rules 16.3 197.9 47.1 192.9 56.7 29.0
Routing none (fast path) 16.3 197.9 47.1 192.9 160.8 82.3
Routing 25 simple queues 16.3 197.9 47.1 192.9 72.6 37.2
Routing 25 ip filter rules 16.3 197.9 33.8 138.4 34.6 17.7
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Part Number:
LAN 10/100 ports:
LAN 10/100 ports: 2
Gigabit Ports:
Gigabit Ports: none
SFP 1G Ports:
SFP 1G Ports: none
SFP 10G Ports:
SFP 10G Ports:none
MiniPCI: none
Antenna Chains:
Antenna Chains: 2
CPU: QCA9531
Wireless Chip Model:
Wireless Chip Model: QCA9531
Architecture: MIPS-BE
Licence Level:
Licence Level: Level4
  • USB: Yes
Memory cards:
  • Memory cards: No
Integrated Wireless:
  • Integrated Wireless: Yes
Voltage Monitor:
  • Voltage Monitor: Yes
Temperature sensor:
  • Temperature sensor: Yes
Serial Port:
  • Serial Port: No
PoE out:
  • PoE out: Yes
Wireless standards:
  • Wireless standards: 802.11b
  • Wireless standards: 802.11g
  • Wireless standards: 802.11n
We use Cookies!
To offer a better experience to our customers. Πολιτική Cookies
Cookie Settings