Tinycontrol GSM V3 CONTROLLER

730 ημέρες
Βάρος: 0.50 kg ανά τεμάχιο
002632
80.80 
(100.19  Με ΦΠΑ)
GSM v3 controller allow monitor by gsm network different phisical parameters and control remotely on/off 5 outputs. Control is done through SMS messages and monitoring can be run by SMS or gprs data transmission to internet server. Http datas can be sent for example to www.thingspeak.com server,...
+

GSM v3 controller allow monitor by gsm network different phisical parameters and control remotely on/off 5 outputs. Control is done through SMS messages and monitoring can be run by SMS or gprs data transmission to internet server. Http datas can be sent for example to www.thingspeak.com server, where are not only collected but can be read as dynamically presented graphs. 

 

MAIN APPLICATION

ISP

  • the power supply control - notification of his disappearance
  • voltage control backup battery
  • temperature control or opening control server cabinet and remote reaction

Smart home

  • Control on / off lighting or other devices remotely or by program
  • a simple alarm system with notification

Instalations

  • temperature control and possible notification, switching valve, switching relay, etc.
  • supply voltage monitoring and if necessary automatic switching to backup source.

Monitoring for Environment and Agriculture

  • Authorized commands sent password
  • Remote voltage measurement

 

GSM v3 allow:

  • management by SMS or USB (after connecting to computer)
  •  upgrade new firmware by USB port
  •  monitoring logic states, for example move sensors, position detectors
  •  supported sensors: PT1000, DS18B20, DTH22 (temperature and humidity)

Technical specification


  • GSM module bands: 900 / 1800 / 1900 MHz
  • SIM interface: 1,8 i 3V
  • USB interface: virtual com port (115200, 8 bits, 1 bit stop, no parity , no bez parzystosci i kontroli przepływu
  • other interfaces: 1-wire (RJ11), SPI, I2C, UART
  • transistor out: 1x 1A/turn on supply voltage
  • OC outs: 4x outs open collector type, transistor BC847B (45V-100mA)
  • logical inputs: 4pcs , max 20V
  • analog inputs: 3pcs, 2x napięcie 0-3,6V, 1x napiecię 0-36V
  • temperature meas.: 1x PT1000, 1 wire sensors x8 DS18B20
  • antena: attached
  • input power supply: 6-28V DC, socket size 5,5mm
  • power consumption: 0.3W without GSM transmission
  • oerational temperature: -20 do +70 C
  • board size: 68x60mm
  • board weight: 57g 

For easier configuration of GSM Controller we recommend use own software GSMControllerTools. It works with firmware 1_07 or later. Configuration can be proceed after installing USB drivers (only for Windows system, Linux don't need), checking port in System Manager (Linux work automatically) and establish connection. In newer firmware 1_15 and up there are available new Config Table features for raising events like relay closing, email or SMS after condition on chosen input is filled. This feature will not be available to setup by GSMControllerToosl, only by commands from console line (also in this software). Other console software we recommend is CuteCom for Linux and Mac OSX systems.

Instruction


 Short manual GSMv3

 Upgrade procedure GSMv3

 Manual v1 for GSMv3 

 Technical Information

 

Firmware


 Firmware GSMv3 1_02

 Firmware GSMv3 1_07
Upgrade application

USB port driver

Linux GSMcontrollerTools PL v1.0
GSMcontrollerTools PL v1.0

 Firmware GSMv3 1_11

 Firmware GSMv3 1_12 

 Firmware GSMv3 1_15
 Firmware GSMv3 1_16

 Firmware GSMv3 1_21

 Firmware GSMv3 1_25

Movie how to Upgrade GSM Controler

Part Number:
GSMKON-040
Προμηθευτές:
Tinycontrol

Δεν βρέθηκαν δημοσιεύσεις

Γράψτε μια κριτική

Πληροφορίες

Αγόρασαν Επίσης