Tinycontrol Current sensor boards

730 days
Weight: 0.30 kg per item
10.25 
(12.71  inc tax)
Board with Hall efect sensor. Current flowing between terminals is isolated from measurement part, but inductes Hall effect which is measured as output voltage proportional to current. Only 0.6m Ω as a resistance of a chip and double ticness cupper layer cause that losses are very small....
+
Board with Hall efect sensor. Current flowing between terminals is isolated from measurement part, but inductes Hall effect which is measured as output voltage proportional to current. Only 0.6mΩ as a resistance of a chip and double ticness cupper layer cause that losses are very small. In offer there are 2 measurement range boards (marked different v sign): +/- 15,5A , +/- 31A and +/- 75A .

This product is intended for use below 48 V. Working with higher voltages can be extremely dangerous and should only be attempted by qualified individuals with appropriate equipment and protective gear.
TECHNICAL DATA:


  • measurement range: ± 15,5 , ± 31A and ± 75A
  • supply voltage: 3-5,5V 

sensitivity:

  • 90 mV/A when Vcc jest 3,3V or 136 mV/A if Vcc It is 5 V
  • 45 mV/A when 3,3 V or 68 mV/A when Vcc 5 V
  • 18.5 mV/A when Vcc is 3.3 V (or 28 mV/A when Vcc is 5 V 

  • path internal resistance: 0.6mΩ
  • maximum voltage in ciurcuit: 100V
  • operating temperature range: -40°C to 125°C
  • board size: 20mmx18mm 
Part Number:
LANKON-040-041-042
Supplier:
Tinycontrol

No posts found

Write a review

Information

MIKROTIK ROUTERS

Customers also bought