Phone Orders 2104511087
Monday - Friday: 9:00 - 17:00
_tmpl_free_shipping_above_amount_max_kilos

MikroTik RBcAPL-2nD, cAP lite, 1.5dBi, 22dBm, 650MHz, 64MB, 2.4GHz, 1xEthernet, L4

002790
Ask a question
730 days
Weight: 0.21 kg per item
25.81 

With VAT 32.00 
+
Volumetric weight: 0.21kg

The cAP lite is a tiny access point device, perfect for public locations and hospitality businesses like hotels, airports, shopping malls etc. Included with the product are two different casings, which can easily be swapped out, or, if you really like to fit the design with the environment, we are providing 3D printer friendly design files.

The cAP lite supports 802.11b/g/n and can be powered by power over ethernet. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. The cAP lite can also be used as a stand alone access point with the full potential of RouterOS.

Details
Product code RBcAPL-2nD
CPU nominal frequency 650 MHz
CPU core count 1
Size of RAM 64 MB
10/100 Ethernet ports 1
Wireless standards 802.11b/g/n
Wireless chip model QCA9533
Supported input voltage 5 V - 60 V
PoE in 802.3af/at
Dimensions Wall case: 88 x 52 x 20 mm Ceiling case: ⌀88 mm x 20 mm
Operating System RouterOS
Tested ambient temperature -40°C .. +70°C
License level 4
Antenna gain DBI 1.5
CPU QCA9533
Max Power consumption 4W
Number of chains 2
Storage type FLASH
Storage size 16 MB

Ethernet test results

RBcAPL-2nD QCA9533 100M one port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.4 23.5 96.3 173.6 88.9
Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 70.9 36.3
Routing none (fast path) 8.1 98.4 23.5 96.3 160.8 82.3
Routing 25 simple queues 8.1 98.4 23.5 96.3 90.8 46.5
Routing 25 ip filter rules 8.1 98.4 23.5 96.3 43.2 22.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Wireless specifications

2.4 GHz
  Transmit power (dBm) Receive Sensitivity Transmit power (mW)
1MBit/s 22 -96 158
11MBit/s 22 -89 158
6MBit/s 20 -93 100
54MBit/s 18 -74 63
MCS0 20 -93 100
MCS7 16 -71 40

wireless parameters may be limited in software, depending on your local regulatory limitations

Part Number:
RBcAPL-2nD
Supplier:
MikroTik
We use Cookies!
To offer a better experience to our customers. Cookies Policy
Accept
Cookie Settings