_tmpl_free_shipping_above_amount_max_kilos
MikroTik Routerboard GrooveG-52HPacn, 24dBm @ 2.4GHz, 26Bm @ 5GHz, 720MHz, 64MB, 1xGigabit, L3
Please sign in so that we can notify you about a reply
Categories
Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS.
Weatherproof, durable and ready to use. Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilize the full benefit of 802.11ac high-speed wireless.
We have two versions available.
- RBGrooveG-52HPacn-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
- RBGrooveG-52HPacn (International) supports 2412-2484MHz and 5150MHz-5875MHz range.
Product specifications
| Details | |
|---|---|
| Product code | RBGrooveG-52HPacn |
| 10/100/1000 Ethernet ports | 1 |
| CPU | QCA9556 |
| CPU core count | 1 |
| CPU nominal frequency | 720 MHz |
| Dimensions | 177 x 44 x 44 mm |
| License level | 3 |
| Max Power consumption | 5W |
| Number of chains | 1 |
| Operating System | RouterOS |
| PCB temperature monitor | Yes |
| PoE in | Yes |
| Size of RAM | 64 MB |
| Storage size | 16 MB |
| Storage type | FLASH |
| Supported input voltage | 10 V - 30 V |
| Tested ambient temperature | -40 +70 C |
| Voltage Monitor | Yes |
| Wireless chip model | QCA-9889 |
| Wireless standards | 802.11a/b/g/n/ac |
Wireless specifications
| 2.4 GHz | |||
|---|---|---|---|
| Transmit power (dBm) | Receive Sensitivity | Transmit power (mW) | |
| 1MBit/s | 24 | -97 | 251 |
| 11MBit/s | 21 | -91 | 126 |
| 6MBit/s | 24 | -93 | 251 |
| 54MBit/s | 21 | -77 | 126 |
| MCS0 | 24 | -93 | 251 |
| MCS7 | 20 | -72 | 100 |
| 5 GHz | |||
| Transmit power (dBm) | Receive Sensitivity | Transmit power (mW) | |
| 6MBit/s | 26 | -93 | 398 |
| 54MBit/s | 21 | -78 | 126 |
| MCS0 | 26 | -93 | 398 |
| MCS7 | 21 | -74 | 126 |
| MCS9 | 19 | -69 | 79 |
wireless parameters may be limited in software, depending on your local regulatory limitations
Ethernet test results
| RBGrooveG-52HPacn | QCA9556 1G one port test | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none (fast path) | 81.2 | 986.1 | 233.1 | 954.8 | 576.7 | 295.3 |
| Bridging | 25 bridge filter rules | 81.2 | 986.1 | 123.7 | 506.7 | 117.8 | 60.3 |
| Routing | none (fast path) | 81.2 | 986.1 | 233.1 | 954.8 | 454.8 | 232.9 |
| Routing | 25 simple queues | 81.2 | 986.1 | 152.6 | 625.0 | 137.2 | 70.2 |
| Routing | 25 ip filter rules | 69.4 | 842.8 | 66.3 | 271.6 | 68.7 | 35.2 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Part Number:
RBGrooveG-52HPacn
Supplier:
MikroTik
